Mold Removal Cost And Risk In Bledsoe County, TN
A typical professional mold job in Bledsoe County runs about $1,250 to $5,100 before rebuild, using the Tennessee nonmetro price level. Below are the 2 ZIP code neighborhoods, the age of the homes, FEMA's water hazard ratings and Tennessee rules.
1993Median year homes were built
30%Homes built before 1980
21%Homes rented, not owned
$165,400Median home value
5,895Housing units
14,905People
Half the homes in Bledsoe County were built before 1993, and 30 percent went up before 1980. Older plumbing, roofs and window seals are where slow leaks start, and slow leaks are the mold most home policies leave out. About 21 percent of homes in Bledsoe County are rented, so most households here carry an owner's policy on the building itself.
Housing age swings by neighborhood. ZIP 37367 has the oldest homes here, a median year of 1990, and ZIP 37338 the newest, 1997.
Typical Prices In Bledsoe County
| Job | Size | National Range | Bledsoe County Estimate |
|---|---|---|---|
| Mold Remediation | a typical professional job | $1,500 to $6,000 | $1,250 to $5,100 |
| Mold Remediation | an attic | $2,000 to $7,500 | $1,700 to $6,350 |
| Mold Inspection and Testing | a visual inspection | $200 to $600 | $150 to $500 |
| Mold Inspection and Testing | an inspection with samples | $300 to $1,000 | $250 to $850 |
| Mold Inspection and Testing | a clearance test | $300 to $800 | $250 to $700 |
The standard limited fungi endorsement caps mold at $5,000. Against a typical job here of up to $5,100, that cap falls short by about $100 at the top of that range. Read the form
Water Hazards FEMA Rates Here
FEMA rates none of the water hazards below as high for Bledsoe County.
| Hazard | FEMA Risk Rating |
|---|---|
| Inland flooding | Very Low |
| Coastal flooding | Not Applicable |
| Hurricane | Very Low |
| Cold wave | Relatively Moderate |
| Winter weather | Relatively Low |
ZIP Code Neighborhoods In Bledsoe County
Tennessee Rules On Mold
Who May Do Mold Work
Tennessee has no stand alone mold inspector license. Instead, the Board for Licensing Contractors has a Mold Remediation classification on its contractor license. Tennessee requires a contractor license for jobs of $25,000 or more, so a large mold job should go to a company licensed in that classification.
State law does not bar one company from both inspecting and remediating the same job, so hiring an independent inspector is your own choice. You can check a contractor’s license and classification on the state’s online license lookup.