Mold Removal Cost In Elizabethton, TN
A typical professional mold job in Elizabethton runs about $1,300 to $5,300 before rebuild. Elizabethton sits in Carter County.
1964Median year homes were built
72%Homes built before 1980
38%Homes rented, not owned
$159,700Median home value
6,729Housing units
14,364People
Half the homes in Elizabethton were built before 1964, and 72 percent went up before 1980. Older plumbing, roofs and window seals are where slow leaks start, and slow leaks are the mold most home policies leave out. About 38 percent of homes in Elizabethton are rented, so most households here carry an owner's policy on the building itself.
Typical Prices In Elizabethton
| Job | Size | National Range | Elizabethton Estimate |
|---|---|---|---|
| Mold Remediation | a typical professional job | $1,500 to $6,000 | $1,300 to $5,300 |
| Mold Remediation | an attic | $2,000 to $7,500 | $1,750 to $6,600 |
| Mold Inspection and Testing | a visual inspection | $200 to $600 | $200 to $550 |
| Mold Inspection and Testing | an inspection with samples | $300 to $1,000 | $250 to $900 |
| Mold Inspection and Testing | a clearance test | $300 to $800 | $250 to $700 |
The standard limited fungi endorsement caps mold at $5,000. Against a typical job here of up to $5,300, that cap falls short by about $300 at the top of that range. Read the form
Water Hazards FEMA Rates Here
FEMA rates none of the water hazards below as high for Carter County.
| Hazard | FEMA Risk Rating |
|---|---|
| Inland flooding | Relatively Moderate |
| Coastal flooding | Not Applicable |
| Hurricane | Very Low |
| Cold wave | Relatively Low |
| Winter weather | Relatively Low |
ZIP Code Neighborhoods In Elizabethton
| ZIP | Median Year Built | Homes Rented | Median Home Value |
|---|---|---|---|
| 37682 | Not published | 0% | Not published |
Tennessee Rules On Mold
Who May Do Mold Work
Tennessee has no stand alone mold inspector license. Instead, the Board for Licensing Contractors has a Mold Remediation classification on its contractor license. Tennessee requires a contractor license for jobs of $25,000 or more, so a large mold job should go to a company licensed in that classification.
State law does not bar one company from both inspecting and remediating the same job, so hiring an independent inspector is your own choice. You can check a contractor’s license and classification on the state’s online license lookup.