Mold Removal Cost In Oak Ridge, TN
A typical professional mold job in Oak Ridge runs about $1,400 to $5,550 before rebuild. Oak Ridge sits in Anderson County.
1963Median year homes were built
69%Homes built before 1980
36%Homes rented, not owned
$233,500Median home value
14,909Housing units
32,088People
Half the homes in Oak Ridge were built before 1963, and 69 percent went up before 1980. Older plumbing, roofs and window seals are where slow leaks start, and slow leaks are the mold most home policies leave out. About 36 percent of homes in Oak Ridge are rented, so most households here carry an owner's policy on the building itself.
Typical Prices In Oak Ridge
| Job | Size | National Range | Oak Ridge Estimate |
|---|---|---|---|
| Mold Remediation | a typical professional job | $1,500 to $6,000 | $1,400 to $5,550 |
| Mold Remediation | an attic | $2,000 to $7,500 | $1,850 to $6,950 |
| Mold Inspection and Testing | a visual inspection | $200 to $600 | $200 to $550 |
| Mold Inspection and Testing | an inspection with samples | $300 to $1,000 | $300 to $950 |
| Mold Inspection and Testing | a clearance test | $300 to $800 | $300 to $750 |
The standard limited fungi endorsement caps mold at $5,000. Against a typical job here of up to $5,550, that cap falls short by about $550 at the top of that range. Read the form
Water Hazards FEMA Rates Here
FEMA rates none of the water hazards below as high for Anderson County.
| Hazard | FEMA Risk Rating |
|---|---|
| Inland flooding | Relatively Moderate |
| Coastal flooding | Not Applicable |
| Hurricane | Very Low |
| Cold wave | Relatively Moderate |
| Winter weather | Relatively Moderate |
ZIP Code Neighborhoods In Oak Ridge
| ZIP | Median Year Built | Homes Rented | Median Home Value |
|---|---|---|---|
| 37830 | 1963 | 35% | $234,500 |
Tennessee Rules On Mold
Who May Do Mold Work
Tennessee has no stand alone mold inspector license. Instead, the Board for Licensing Contractors has a Mold Remediation classification on its contractor license. Tennessee requires a contractor license for jobs of $25,000 or more, so a large mold job should go to a company licensed in that classification.
State law does not bar one company from both inspecting and remediating the same job, so hiring an independent inspector is your own choice. You can check a contractor’s license and classification on the state’s online license lookup.