Mold Removal Cost And Risk In Gibson County, TN
A typical professional mold job in Gibson County runs about $1,300 to $5,150 before rebuild, using the Jackson, TN price level. Below are the 9 ZIP code neighborhoods, the age of the homes, FEMA's water hazard ratings and Tennessee rules.
1976Median year homes were built
56%Homes built before 1980
33%Homes rented, not owned
$149,700Median home value
22,500Housing units
50,610People
Half the homes in Gibson County were built before 1976, and 56 percent went up before 1980. Older plumbing, roofs and window seals are where slow leaks start, and slow leaks are the mold most home policies leave out. About 33 percent of homes in Gibson County are rented, so most households here carry an owner's policy on the building itself.
Housing age swings by neighborhood. ZIP 38338 has the oldest homes here, a median year of 1944, and ZIP 38343 the newest, 1978.
Typical Prices In Gibson County
| Job | Size | National Range | Gibson County Estimate |
|---|---|---|---|
| Mold Remediation | a typical professional job | $1,500 to $6,000 | $1,300 to $5,150 |
| Mold Remediation | an attic | $2,000 to $7,500 | $1,700 to $6,400 |
| Mold Inspection and Testing | a visual inspection | $200 to $600 | $150 to $500 |
| Mold Inspection and Testing | an inspection with samples | $300 to $1,000 | $250 to $850 |
| Mold Inspection and Testing | a clearance test | $300 to $800 | $250 to $700 |
The standard limited fungi endorsement caps mold at $5,000. Against a typical job here of up to $5,150, that cap falls short by about $150 at the top of that range. Read the form
Water Hazards FEMA Rates Here
FEMA rates none of the water hazards below as high for Gibson County.
| Hazard | FEMA Risk Rating |
|---|---|
| Inland flooding | Relatively Low |
| Coastal flooding | Not Applicable |
| Hurricane | Very Low |
| Cold wave | Relatively Moderate |
| Winter weather | Relatively Moderate |
ZIP Code Neighborhoods In Gibson County
| ZIP | Area | Median Year Built | Built Before 1980 | Median Home Value |
|---|---|---|---|---|
| 38233 | Gibson County | 1969 | 60% | $90,900 |
| 38316 | Gibson County | 1972 | 63% | $117,200 |
| 38330 | Gibson County | 1971 | 68% | $118,700 |
| 38338 | Gibson | 1944 | 88% | Not published |
| 38343 | Gibson County | 1978 | 53% | $164,200 |
| 38358 | Gibson County | 1976 | 59% | $157,900 |
| 38369 | Gibson County | 1970 | 64% | $104,400 |
| 38382 | Gibson County | 1972 | 62% | $114,600 |
| 38389 | Yorkville | 1945 | 69% | $78,600 |
Tennessee Rules On Mold
Who May Do Mold Work
Tennessee has no stand alone mold inspector license. Instead, the Board for Licensing Contractors has a Mold Remediation classification on its contractor license. Tennessee requires a contractor license for jobs of $25,000 or more, so a large mold job should go to a company licensed in that classification.
State law does not bar one company from both inspecting and remediating the same job, so hiring an independent inspector is your own choice. You can check a contractor’s license and classification on the state’s online license lookup.