Mold Removal Cost And Risk In Roane County, TN
A typical professional mold job in Roane County runs about $1,400 to $5,550 before rebuild, using the Knoxville, TN price level. Below are the 3 ZIP code neighborhoods, the age of the homes, FEMA's water hazard ratings and Tennessee rules.
1979Median year homes were built
51%Homes built before 1980
22%Homes rented, not owned
$212,300Median home value
25,560Housing units
54,403People
Half the homes in Roane County were built before 1979, and 51 percent went up before 1980. Older plumbing, roofs and window seals are where slow leaks start, and slow leaks are the mold most home policies leave out. About 22 percent of homes in Roane County are rented, so most households here carry an owner's policy on the building itself.
Housing age swings by neighborhood. ZIP 37748 has the oldest homes here, a median year of 1975, and ZIP 37763 the newest, 1988.
Typical Prices In Roane County
| Job | Size | National Range | Roane County Estimate |
|---|---|---|---|
| Mold Remediation | a typical professional job | $1,500 to $6,000 | $1,400 to $5,550 |
| Mold Remediation | an attic | $2,000 to $7,500 | $1,850 to $6,950 |
| Mold Inspection and Testing | a visual inspection | $200 to $600 | $200 to $550 |
| Mold Inspection and Testing | an inspection with samples | $300 to $1,000 | $300 to $950 |
| Mold Inspection and Testing | a clearance test | $300 to $800 | $300 to $750 |
The standard limited fungi endorsement caps mold at $5,000. Against a typical job here of up to $5,550, that cap falls short by about $550 at the top of that range. Read the form
Water Hazards FEMA Rates Here
FEMA rates none of the water hazards below as high for Roane County.
| Hazard | FEMA Risk Rating |
|---|---|
| Inland flooding | Relatively Low |
| Coastal flooding | Not Applicable |
| Hurricane | Very Low |
| Cold wave | Relatively Moderate |
| Winter weather | Relatively Moderate |
ZIP Code Neighborhoods In Roane County
Tennessee Rules On Mold
Who May Do Mold Work
Tennessee has no stand alone mold inspector license. Instead, the Board for Licensing Contractors has a Mold Remediation classification on its contractor license. Tennessee requires a contractor license for jobs of $25,000 or more, so a large mold job should go to a company licensed in that classification.
State law does not bar one company from both inspecting and remediating the same job, so hiring an independent inspector is your own choice. You can check a contractor’s license and classification on the state’s online license lookup.